219.299.0080Send Photos for a Quote

A better finish begins with a better process.

Cabinet refinishing is not simply applying a new color. The quality of the finished kitchen depends on everything that happens before, between, and after the finish coats.

We use a disciplined system built around preparation, surface refinement, controlled spray application, environmental management, quality inspection, and careful reinstallation.

Two work environments. One finishing system.

In our paint facility.

Doors and drawer fronts are removed, labeled, and transported to our professional finishing facility, where they move through the complete preparation and finishing sequence: cleaning, de-glossing, repairs, sanding, primer, refinement, finish coats, inspection, controlled drying, and final preparation for installation.

Stained doors and white finished doors on drying racks

On your job site.

While those components are being refinished, we prepare and finish the cabinet frames and exposed surfaces that remain in your home. Your kitchen is protected and masked before preparation and spray application begin.

A kitchen masked and prepped for refinishing, with cabinets, floors, and appliances protected

Behind every finished kitchen is a process most homeowners never see.

Choose a process below to see every step in detail.

1Remove doors and drawer fronts
Doors and drawer fronts are removed several days ahead of the on-site work.
2Transport to the paint facility
Components are carefully transported to the professional finishing environment.
3Label and rack parts
Each component is identified and organized so it returns to its proper location.
4Remove and label hardware
Hardware is removed, identified, and kept organized.
5Degreasing
Surfaces are thoroughly cleaned to remove oils, residue, and contaminants.
6Sand to de-gloss
Existing finishes are mechanically de-glossed to support the preparation system.
7Bodywork
Surface defects and imperfections are addressed as appropriate.
8Sand bodywork
Repairs are refined and blended into the surrounding surface.
9Final wash
Prepared surfaces receive a final cleaning before coating.
10Spray primer coats
Primer coats are professionally spray-applied.
11Sand the primer
Primer is refined between stages to improve surface quality.
12Spray first finish coat
The first pigmented finish coat is professionally applied.
13Quality inspection
Surfaces are inspected before the final finish application.
14Spray final finish coats
Final finish coats are spray-applied for a smooth, consistent appearance.
15Controlled drying
Finished components stay protected while the coatings dry and cure.
16Microfiber detailing
Components receive a final surface cleaning and detailing.
17Identification labels
Identification is maintained for accurate reinstallation.
18Pack out
Finished parts are protected and prepared for transport.
19Deliver
Components return to the project site.
20Install
Doors and drawer fronts are carefully reinstalled and adjusted.
1Remove drawer boxes and glides
Components are removed as required to access and prepare the fixed cabinetry.
2Pull appliances forward
Appliances are repositioned as needed for access and protection.
3Mask the kitchen
The work area and surrounding surfaces are carefully isolated and protected.
4Degreasing
Cabinet surfaces are cleaned to remove oils, residue, and contaminants.
5Sand to de-gloss
Existing finishes are de-glossed as part of surface preparation.
6Bodywork
Surface defects and imperfections are addressed where appropriate.
7Sand bodywork
Repairs are refined before coating.
8Final wash
Prepared surfaces receive a final cleaning.
9Equipment and containment setup
Professional finishing equipment and the spray containment are set up, with industrial exhaust.
10Spray primer coats
Primer coats are spray-applied to the fixed cabinet surfaces.
11Sand the primer
Primer surfaces are refined before finish application.
12Spray first finish coat
The first finish coat is professionally spray-applied.
13Quality inspection
Surfaces are inspected before the final finish stage.
14Spray final finish coat
Final finish application creates the completed appearance.
15Vent and remove containment
The containment, which holds overspray and odor, is vented through the exhaust system and removed.
16Start the three-stage air scrubber
The air scrubber runs while we de-mask and restore the kitchen. Its filters are replaced on every project.
17De-mask and restore
Protective masking is removed and the kitchen is returned to order.
18Final cleanup
The work area is cleaned after finishing operations.
19Overnight air cleansing, if you like
The air scrubber can stay on overnight at your request. We show you how to turn it off.
20Haul away
Project debris and disposable protection materials are removed.
21Return for final installation
The finished doors and drawer fronts return to the site for installation.
22Install
Finished components are installed, adjusted, inspected, and presented as a complete kitchen.

Select any step to learn more.

Preparation isn't one step.

It's part of the finish itself.

A simplified cabinet-painting description might read: clean, sand, prime, paint. A professional refinishing system is more deliberate. Cleaning, de-glossing, repairs, sanding, washing, primer refinement, inspection, environmental control, finish application, drying, handling, and reinstallation all shape the result.

The principlePreparation is not something that happens before the refinishing process. Preparation is part of the refinishing process.

Stronger adhesion

A finish built on properly prepared surfaces.

Refined appearance

Surface refinement creates a smoother result.

Everyday durability

Coatings and process chosen for the demands of a kitchen.

Consistent results

A controlled process, inspected at every stage.

Why we use a professional paint facility.

Some work should not be done in your kitchen. Removing doors and drawer fronts lets them move through a dedicated preparation and finishing sequence, away from the living space you are using.

Controlled application

Professional spray equipment and a dedicated finishing workflow.

Component organization

Doors, drawer fronts, and hardware stay identified throughout.

Quality inspection

Components are examined and refined between coating stages.

Controlled drying

Finished components stay protected while the coatings dry.

Organized refinishing shop
An organized shop
Numbered tags on doors
Every door tagged
Labeled hinges
Hardware labeled
Sanding preparation
Preparation by hand

What happens inside your home?

Protection comes before production.

Before refinishing begins, the kitchen is prepared. Appliances are addressed as required, surrounding areas are masked and protected, equipment is set up, and fixed cabinet surfaces move through their own preparation and spray-finishing sequence.

During finishing, a spray containment holds overspray and odor and is vented through industrial exhaust. Once the containment comes down, a three-stage air scrubber runs while we de-mask and restore the kitchen. Its filters are replaced on every project, and if you like, it can stay on overnight.

The process and the coating work together.

Every kitchen we refinish is finished in Milesi Italian Coatings, a European luxury finish developed for cabinetry, millwork, and fine interior wood finishes. The coating is one part of the system. Preparation, application equipment, environmental control, and experience all shape the finish.

Premium material plus disciplined processThe goal is not simply to change the color. It is to create a refined finish through a repeatable professional system.

From the first label to the final door.

Every stage has a purpose. Every component has a place. Every surface receives the preparation the finish requires. The result is a professionally refinished kitchen, not cabinetry that has simply been painted a new color.

See this process on real kitchens: cabinet refinishing in Valparaiso and cabinet painting in Valparaiso.

Send Photos for a Quote
  1. Send photos
  2. We review your kitchen
  3. Receive your proposal

Quote typically within 24 hours.
No pressure.

Prefer to talk it through first?

Book an On-Site EvaluationCall 219.299.0080
CallSend Photos for a Quote